Hemp Filament 1.75mm Natural 750 gram

  • €41.28
    Inclusive VAT:
    €49.95
    Product Id: 8719189222180
    Availability: In stock
1.75mm - 750 gram: €41.28
2.85mm - 750 gram: €41.28


Hemp Filament - Natural / 2.85mm / 750 gram | 3D4Makers.com
Return within 30 days for refund (Refund Policy)
Estimated delivery time *:
  • World: 10 days
  • Europe: 5 days
  • Benelux: 2 days
* Depending on customs

Hemp Filament

    Technical information:

    Polylactic Acid (PLA) with 10% Hemp Fibers (from the bark of the cannabis plant) Old meets new; The Hemp fiber one of the oldest and strongest natural fiber. PLA is a recently developed biodegradable plastic derived from renewable organic resources (corn starch or sugarcane). PLA is recyclable but can also be biological decomposed in composting plants. Bringing (compounding) these two materials together creates a strong but biodegradable and compostable new material. The Hemp fiber technique is based on the products of Hemplyne.

    The 3D4MAKERS PLA Hemp Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PLA Hemp Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

    For the best results we advise users of the 3D4MAKERS PLA Hemp Filament to use a different printing nozzle than the standard nozzle usually provided with 3D printers. A nozzle with a diameter of at least 0.5mm will give the best printing results.

    The PLA Hemp Filament produced by 3D4MAKERS does not meet  any European regulations concerning plastic materials and articles coming into contact with food.

    Measurements & Tolerance

    Size Diameter tolerance Roundness
    1,75 mm Filament +/- 0,08mm 95%
    2,85 mm Filament +/- 0,10mm 95%
    Moisture  content < 0,05%

     

     

    Safety information

    NOT AVAILABLE YET

    3D4MAKERS assumes, based on the information provided by Hemplyne, that all raw materials used in their product are in accordance with the European regulations on RohS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).

    Legally Obliged Information

    NOT AVALABLE YET

    3D4MAKERS assumes, based on the information provided by Hemplyne, that all raw materials used in their product are in accordance with the European regulations on RohS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals

    Environmental information

    Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for 3D misprints and the Filament reel.

    Together we can protect the environment!

    Printer settings

    Description Value
    Printer nozzle temperature 180 - 220°C
    Heated bed temperature 20 - 60°C

    To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.

    When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Hemp Filament in a bag and stored in a cool, dry and dark place until it is used again.


    Other 3D Printing Filament

    Customer Reviews

    No reviews yet Write a review

    Write a review

    I love this product!

    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur porttitor aliquam lorem, rhoncus tincidunt massa condimentum nec.