Magigoo HT, glue stick for HT filament.
An adhesive made for the high temperature end of the catalogue, tested to a build plate of 150 °C or lower. For the materials that warp hardest. read further
- Tested to a 150 °C build plate
- For PEEK, PEKK, Ultem and PPSU
- Wipes off with a damp cloth
Not sure which adhesive your material needs, or ordering for a workshop? Speak with an engineer before you order.
Pick the size you need and add it to your order.
Magigoo HT: adhesion at the temperatures where nothing else holds.
High temperature thermoplastics such as PEEK, PEKK, Ultem and PPSU, and their carbon and glass reinforced versions, are printed hot and warp readily. That combination makes the first layer the hardest part of the job.
Magigoo HT was developed for exactly that case and has been designed and tested to work with a build plate temperature of 150 °C or lower. The part should come off relatively easily once it cools, and the residue wipes away with a damp cloth. It is designed for a glass surface but also works on sheets such as high temperature Garolite, Kapton and PEI.
Safety.
Using this product with filaments other than the high temperature types it was made for can cause over-adhesion and damage your build surface.
Tip.
For larger prints a 20 mm brim is recommended.
- Shake. Shake the bottle.
- Apply. Press the nib on the bed to open the inner valve and spread over the printing area.
- Print. Print to the filament and printer manufacturer recommendations.
- Cool. Let the plate cool. The print should come off on its own.
- Clean. Wipe the residue off with a damp cloth.
Which adhesive for which filament.
Every adhesive is matched to a group of materials, and using one on the wrong material is what causes trouble. This bottle covers the 14 filaments on the bold row. The rest of the range is listed so you can check your own material either way.
Cookie consent. Cookie preferences.
We use cookies to run the store, measure how it is used, and personalise marketing. Pick what you are comfortable with. You can change your mind any time via the Cookie settings link in the footer. Read the cookie policy
Choose which categories of cookies you want to allow. Necessary cookies cannot be turned off because the store cannot function without them.
- Choosing a selection results in a full page refresh.
- Opens in a new window.