The 3D4MAKERS PEI Filament will be delivered in a vacuum packaging in our recyclable box.
Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 3D4MAKERS has selected Ultem 1010 for their filament.
The 3D4MAKERS PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
Measurements & Tolerance
1,75 mm Filament
2,85 mm Filament
|Impact strength Notched Izod
|Printer nozzle temperature
|360 - 400°C
|Heated bed temperature
|120 - 160°C
|Magigoo HT on glass or a PEI sheet
|120°C, minimal 4 hours
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.
When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Filament in a bag and stored in a cool, dry and dark place until it is used again.
REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as dangerous for supply/use.
Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as dangerous for supply/use.
COMPOSITION AND INFORMATION ON THE COMPONENTS
Classificatie Verordening (EG) Nr. 1272/2008
(EG) Nr. 67/548/EEC
Exposure controls / Personal protection
Local Exhaust Ventilation at the workplace or on the 3D printer is required.
Legally Obliged Information
1 Specific safety, health and environmental regulations and legislation for the substance or mixture.
Classification of the substance or mixture
The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS) and Directive 67/548/EEC.
2 Chemical safety assessment: Does not apply
RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).
Do not use in medical applications involving permanent implantation in the human body.
The PEI Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.