PLLA Filament 1.75mm Natural 750 gram

  • €92.00
    Inclusive VAT:
    €111.32
    Product Id: 8719189222319
    Availability: In stock
1.75mm - 750 gram: €92.00


PLLA Filament - Natural / 1.75mm / 750 gram | 3D4Makers.com
Return within 30 days for refund (Refund Policy)
Estimated delivery time *:
  • World: 10 days
  • Europe: 5 days
  • Benelux: 2 days
* Depending on customs

PLLA (Poly L Lactic Acid) Filament 

PPLA is currently only available with a diameter of 1.75mm. Please check back later. 

The 3D4MAKERS PLLA Filament will be delivered in a vacuum packaging in our recyclable box. 

Technical information:

Poly L Lactic Acid (PLLA) is a processable semi-crystalline thermoplastic made by fermentation from renewable carbohydrate feedstock. PLLA is quite stable under everyday conditions, although it does degrade slowly in humid environments at temperatures above its glass transition temperature, which is 55°C. Therefore, composting is usually carried out in professional facilities over a number of weeks. Its chemical resistance is somewhat limited although it is said to have good resistance to solvents in general. PLLA is a stiff polymer of high crystallinity (60-70%), whose mechanical properties are similar to those of polystyrene. PLLA is mostly used in food packaging, but it is also used for a range of medical applications which are in the research phase. The Molecular weight is 60000 – 80000, the Viscosity is 300000 CP and the Melting Point is 150 - 180°C.

The 3D4MAKERS PLLA Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PLLA Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

The PLLA Filament produced by 3D4MAKERS meets the European regulations EC No. 1935/2004, EC No. 2023/2006 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food. The colorants used by 3D4MAKERS to colour the Filament also meet these European regulations.

Measurements & Tolerance

Size Diameter tolerance  roundness

1,75 mm Filament

+/- 0,05mm

99%

Moisture content < 0,05%

 

Physical properties

Description Value Test method
Density 1,26 g/cm3 ISO 1183

Mechanical properties

Description Value Test method
Tensile Strenght 71 Mpa ISO 527
Flexural Modulus 3310 Mpa ISO 178
Charpy Impact strenght 19.6 Kj/m² ISO 179
Hardness (15s) shore D 80 ISO 868

Printer settings

Description Value
Printer nozzle temperature 170 - 220°C
Heated bed temperature 20 - 60°C

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.

When the 3D printer is not being used it is important to keep the 3D4MAKERS PLLA Filament in a bag and stored in a cool, dry and dark place until it is used again.

Safety information

REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as hazardous.

Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as hazardous.

COMPOSITION AND INFORMATION ON THE COMPONENTS

Mixture

This product is a mixture.

CAS No./EG No./Index

REACH Number

Quantity

Components

Classification        Regulation

(EC) No. 1272/2008

CAS No. 9051-89-2 EG No. Polymer

----------

100 %

Polylactid resin

Not classified

 

Legally Obliged Information

1 Specific safety, health and environmental regulations and legislation for the substance or mixture.

European inventory of existing commercial chemical substances (EINECS)

The components of this mixture are either included in the EINECS list or exempt.

2 Chemical safety assessment: Does not apply

RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals).

The PLLA Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.

Environmental information

Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for  3D misprints and the Filament reel.

Together we can protect the environment! 


Other 3D Printing Filament

Customer Reviews

No reviews yet Write a review

Write a review

I love this product!

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur porttitor aliquam lorem, rhoncus tincidunt massa condimentum nec.