Luvocom® 3F PAHT KK 50056 BK FR Filament

3D4MakersSKU: LPAFR-0000-175-750-3D4M

Color: BK
Diameter: 1.75mm
Weight: 750 gram
Price:
Sale price€89.95

Description

Luvocom® 3F PAHT KK 50056 BK FR is a flame retardant High-temperature polyamide. Due to the halogen free ceramic spheres reinforcement you can 3D print flame resistance parts with thicknesses of ≥0.4mm and achieve UL-94 V0. This material is optimised for FFF / FDM 3D printing systems and has enhanced printability with high chemical and mechanical properties. It's a PA6 based material but it exhibits lower water absorption and higher temperature resistance. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber. This 3D4Makers PAHT filament features the following properties

    • High dimensional stability
    • Easy to print, low warping and increased layer adhesion
    • Flame retardant UL94 V0 @ 0.4mm (printed test bar)
      • UL94 Vertical Burning Test
      • EN 45545 (fire behaviour of materials in trains)
        • ISO 4589-2 OI (oxygen Index) R22 + R23 - HL1, HL2, HL3
        • ISO 5659-2 Ds (smoke density) R22 + R23 - HL3

 

Material properties

Description Value Test method
Density 1,49 g/cm3 ISO 1183-3
Tensile  strength (at 23°C/50% rh) 55 MPa ISO 527
Elongation at max. force (at 23°C/50% rh)
1,2 %
ISO 527
Modulus of Elasticity  (at 23°C/50% rh) 6 GPa ISO 527
Heat Distortion Temp. 90 °C ISO 75
Continuous Service Temp. 120 °C IEC 60216
Maximum (short term) Use Temp. 160  °C /
Flammability behaviour (V-0)
UL 94
Insulation resistance strip electrode >10⁹ DIN IEC 60167
Surface resistance >10⁹ DIN IEC 60093
Water absorption <0,3% ISO 62

 

Printer recommendations 

Description Value
Printer nozzle temperature 265 - 290°C
Heated bed temperature 80 - 90°C
Print Speed 40 - 60 mm/s
Bed Adhesion Magigoo PA on glass or a PEI Sheet
Pre drying recommendations 100°C, 4 hours or 70°C, >5 hours
Support materials HIPS and PVOH materials
Extra We advise to use a adapted nozzle (>0.5mm) for filled filaments

 

*Printing profile available in Ultimaker Marketplace


To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again.

 

Documents

PDF icon Technical Data Sheet (149 KB)
Material Safety Data Sheet (250 KB)

 

 

Customer Reviews

Based on 1 review Write a review

Payment & Security

Amazon American Express Apple Pay Google Pay iDEAL Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed