Facilan™ PCL 100 Polycaprolactone 750 gram

Facilan™ PCL 100 it is perfect for high-value applications such as medical research.
Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications.
Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research.
Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C.
Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol.
Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance.
Filament produced by ElogioAM is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food.
The material has an amazing adhesion between layers which results in great improvement of the impact resistance, strength, durability, and printability.
Due to the low melting point, of Facilan™ PCL100 it can be reshaped after 3D printing in water with a temperature of 55 °C.

Recommended restrictions
Do not use in medical applications involving permanent implantation in the human body.

Elogio AM Polycaprolactone Facilan™ PCL 100 is one of the most extensively used bioprinting and medical 3D printing research materials worldwide.

Sold on a 750-gram spool in both 1.75mm and 2.85mm diameter.

Facilan™ PCL100 Material Properties

Print Settings

Bed Temperature: 30-45°C
Adhesion: PEI sheets
Print Temperature: 130 to 170°C
Print Speed: 20-40 mm/s
Notes: This material will flow readily from your nozzle, for best results use extra cooling on your model and bed.

TDS

MSDS

You can download the Material Safety Data Sheets for Facilan™ PCL100 here:

German